Solid Wood Flooring : OAK |
||||
Items |
Face |
Back |
||
grae A |
grade B |
grade CD |
||
Sound Knots |
Ф<3㎜ Length≤500㎜≤2pcs |
Ф≤8mm Length≤500≤2pcs |
Ф≤20㎜ Unlimited |
Unlimited |
Dead Knots |
Not allowed |
Ф≤4㎜ Length≤500≤1pcs |
Ф≤10㎜≤5pcs |
Ф≤20㎜ Unlimited |
Worm Hole |
Not allowed |
Not allowed |
Ф≤2㎜≤5pcs Must Puffy |
Ф≤15㎜ Unlimited |
Black Line |
Not allowed |
Unlimited |
Unlimited |
Unlimited |
SAP wood |
MAPLE Not allowed,BRICH Allowed |
<10﹪ of Area MAPLE,BRICH Allowed |
MAPLE Unlimited,BRICH Allowed |
MAPLE Unlimited,BRICH Allowed |
Rot |
Not allowed |
Not allowed |
Not allowed |
Dot<20﹪ of Area |
Damage |
Not allowed |
Not allowed |
Not allowed |
Length≤ 30﹪ of length Width≤20﹪ of Width |
Crack |
Not allowed |
Not allowed |
0.1×15㎜≤2pcs |
Width 0.5㎜ Length 50㎜ Unlimited |
Wave Mark |
Not allowed |
Not allowed |
Slightly |
Unlimited |
Press Mark |
Not allowed |
Not allowed |
Slightly |
Unlimited |
Scratch |
Not allowed |
Very Slight |
Slightly |
Unlimited |
Bubble |
Not allowed |
Not allowed |
Not allowed |
Unlimited |
Lacquer Uneven |
Not allowed |
Not allowed |
Not allowed |
Unlimited |
Pin |
Not allowed |
Ф≤0。5≤3pcs |
Ф≤0。5≤3pcs |
Unlimited |
Orange Peal |
Not allowed |
Not allowed |
≤5﹪ of Area |
Unlimited |
Rough |
≤5pcs |
≤8pcs |
≤8pcs |
Unlimited |
Milling Tolerance
Bending |
Short |
Length≤500㎜, allowed≤0.02﹪ of length, Length≥500㎜,allowed≤0.03﹪ of length |
Cupping |
Bending≤0.2﹪ of width, Cupping≤0.15% of width |
|
Banana |
≤0.3% of length |
|
Gap |
≤0.1㎜ |
|
High-Low Difference |
≤0.2㎜ |
Others: MC: 7%≤MC≤EMC; Varnish adherence: A grade 0-1; B grade 2; Varnish
Hardness is up to customer's request.
Oak 3-layer 3-strip Engineered flooring quality standard |
|||||
Location |
Defects |
Grade A |
Grade B |
Grade CD |
|
Face Veneer |
Live knot |
Diameter ≤ 2mm; |
Diameter ≤ 5mm; |
Diameter ≤ 15mm; |
|
Dead knot |
Not allowed |
3 allowed, diameter ≤ 3mm |
3 allowed, diameter ≤ 10mm |
||
Sapwood |
Not allowed |
Not distinct, |
≤ 25% of plank's area; |
||
Colour Variation |
Natural and harmonic |
Slight |
Low contrast |
||
Rot |
Not allowed |
Slight |
Slight |
||
Inbark |
Not allowed |
Not allowed |
Light and natural, |
||
Pith |
Not allowed |
Not allowed |
Not allowed |
||
Retrorse veins |
Not allowed |
Slight |
Allowed |
||
Crack |
Not allowed |
Not allowed |
Slight, |
||
Veins |
FQ mixed |
FQ mixed |
FQ mixed |
||
Black/Blue spot |
Not allowed |
Not allowed |
Slight |
||
Brown line |
Not allowed |
Not allowed |
Allowed |
||
Dimension shortness |
Not allowed |
Not allowed |
Not allowed |
||
Glue stains |
Not allowed |
Not allowed |
Slight |
||
Wormholes |
Not allowed |
Not allowed |
2 allowed, |
||
Indentation |
Not allowed |
Not allowed |
Slight |
||
Strong wooden lump |
Not allowed |
Slight |
Slight |
||
Discolouration |
Not allowed |
Not allowed |
Slight, natural |
||
Resin pocket |
Not allowed |
Not allowed |
Length < 1mm |
||
Wane |
Not allowed |
Not allowed |
Slight |
||
Wood abnormality |
Not allowed |
Not allowed |
Slight |
||
Face veneer gap |
Transverse |
0.1mm |
0.2mm |
0.2mm |
|
Lengthwise |
0.1mm, length > 10mm |
0.2mm, length > 200mm |
0.2mm, length > 300mm |
||
Middle Layer |
Middle layer gap |
3mm |
3mm |
3mm |
|
Rot |
Slight, no fall off |
Slight, no fall off |
Slight, no fall off |
||
Tongue missing |
≤ 20mm (cumulative) |
≤ 20mm (cumulative) |
≤ 30mm (cumulative) |
||
Destruction of ends |
Not allowed |
Slight |
≤ 2mm each end |
||
Back Veneer |
Bore hole |
Diameter ≤ 30mm |
Diameter ≤ 30mm |
Diameter ≤ 30mm |
|
Dead knot |
No fall off |
No fall off |
Allowed |
||
Wormholes |
Few |
Slight |
Mild |
||
Inbark |
Slight |
Slight |
Allowed |
||
Cymbate and round mending |
≤ 5% of plank's area |
≤ 10% of plank's area |
Allowed |
||
Dry crack |
Slight |
Slight |
Length ≤ 1000mm; |
||
Lack of sanding |
Slight |
Slight |
Allowed |
||
Varnish |
Putty mending mark |
Not allowed |
Not allowed |
Slight |
|
Varnish stains |
Not allowed |
Not allowed |
Slight |
||
Light not even |
Not allowed |
Not allowed |
Slight |
||
Varnish protruding over the edge |
Not allowed |
Not allowed |
Slight |
||
Scratches /Exposed undercoat |
Not allowed |
Not allowed |
Slight |
||
Varnish not even |
Not allowed |
Not allowed |
Slight |
||
Others |
Tongue deflection |
Not allowed |
Not allowed |
Not allowed |
|
Roughness of the tongue and groove |
Not allowed |
Not allowed |
Slight |
||
Wanting arris |
Not allowed |
Not allowed |
Slight |
||
Joining of tongue and groove |
Good fit |
Good fit |
Good fit |
||
Cup warping concave |
Not allowed |
Chord ≤ 0.15% of plank's width |
Chord ≤ 0.15% of plank's width |
||
Cup warping convex |
Chord ≤ 0.20% of plank's width |
Chord ≤ 0.20% of plank's width |
Chord ≤ 0.20% of plank's width |
||
Bow warping concave |
Chord ≤ 0.10% of plank's length |
Chord ≤ 0.10% of plank's length |
Chord ≤ 0.20% of plank's length |
||
Bow warping convex |
Chord ≤ 0.50% of plank's length |
Chord ≤ 1% of plank's length |
Chord ≤ 1% of plank's length |
||
Height difference |
0.1mm |
0.1mm |
0.1mm |
||
Roughness of ends |
Not allowed |
Not allowed |
Slight |
||
Tolerance on Dimensions |
Length (+/-) 1mm,Width (+/-) 0.1mm,Thickness (+/-) 0.1mm,Gap 0.1mm |
Oak 1-strip quality Standard |
|||||
Location |
Defects |
GradeA |
Grade B |
Grade C |
Grade D |
Face Veneer |
Live knot |
Diameter ≤ 2mm ; |
Diameter ≤ 5mm ; |
3 allowed, diameter ≤ 10mm |
Not restricted |
Dead knot |
Not allowed |
2 allowed, diameter ≤ 2mm |
2 allowed, diameter ≤ 5mm , sparse |
3 allowed, diameter ≤ 15mm , sparse |
|
Sapwood |
Not allowed |
Not distinct, |
≤ 5% of plank's width (mending) |
≤ 30% of plank's width (mending) |
|
Colour variation |
Not allowed |
Not allowed |
Slight and natural |
Natural and harmonic, low contrast |
|
Rot |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Inbark |
Not allowed |
Not allowed |
Not allowed |
2 allowed, length ≤ 15mm ; |
|
Pith |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Crack |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Brown line |
Not allowed |
Not allowed |
2 allowed, sparse |
4 allowed, |
|
Stains |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Wormholes |
Not allowed |
Not allowed |
Not allowed |
5 allowed, sparse |
|
Plinth mark |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Discolouration |
Not allowed |
Not allowed |
Not allowed |
Slight and natural |
|
Wane |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
|
Middle Layer |
Middle Layer Gap |
3mm |
3mm |
3mm |
3mm |
Rot |
Slight, no fall off |
Slight, no fall off |
Slight, no fall off |
Slight, no fall off |
|
Tongue missing |
≤ 20mm (cumulative) |
≤ 20mm (cumulative) |
≤ 20mm (cumulative) |
≤ 30mm (cumulative) |
|
Destruction of ends |
Not allowed |
Not allowed |
Slight |
≤ 2mm each end |
|
Back Veneer |
Bore hole |
Diameter ≤ 30mm |
Diameter ≤ 30mm |
Diameter ≤ 30mm |
Diameter ≤ 30mm |
Dead knot |
No fall off |
No fall off |
No fall off |
Allowed |
|
Wormholes |
Few |
Few |
Slight |
Mild |
|
Inbark |
Slight |
Slight |
Slight |
Allowed |
|
Cymbate and round mending |
≤ 5% of plank's area |
≤ 5% of plank's area |
≤ 10% of plank's area |
Allowed |
|
Dry crack |
Slight |
Slight |
Slight |
Length ≤ 1000mm ; |
|
Lack of sanding |
Slight |
Slight |
Slight |
Allowed |
|
Varnish |
Putty mending mark |
Not allowed |
Not allowed |
Not allowed |
Slight |
Varnish stains |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Light not even |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Varnish protruding over the edge |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Scratches /Exposed undercoat |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Varnish not even |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Others |
Tongue deflection |
Not allowed |
Not allowed |
Not allowed |
Not allowed |
Roughness of the tongue and groove |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Wanting arris |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Joining of tongue and groove |
Good fit |
Good fit |
Good fit |
Good fit |
|
Cup warping concave |
Not allowed |
Not allowed |
Chord ≤ 0.15% of plank's width |
Chord ≤ 0.15% of plank's width |
|
Cup warping convex |
Chord ≤ 0.20% of plank's width |
Chord ≤ 0.20% of plank's width |
Chord ≤ 0.20% of plank's width |
Chord ≤ 0.20% of plank's width |
|
Bow warping concave |
Chord ≤ 0.10% of plank's length |
Chord ≤ 0.10% of plank's length |
Chord ≤ 0.10% of plank's length |
Chord ≤ 0.20% of plank's length |
|
Bow warping convex |
Chord ≤ 0.50% of plank's length |
Chord ≤ 0.50% of plank's length |
Chord ≤ 1% of plank's length |
Chord ≤ 1% of plank's length |
|
Height difference |
0.05mm |
0.05mm |
0.05mm |
0.05mm |
|
Roughness of ends |
Not allowed |
Not allowed |
Not allowed |
Slight |
|
Tolerance on dimensions |
Length (+/-) 1mm ,Width (+/-) 0.1mm ,Thickness (+/-) 0.1mm ,Gap 0.1mm |
ORDERING DETAILS
MINIMUM ORDER: 200SQ.M
DELIVERY TIME: ABOUT 25 DAYS
SAMPLE AVAILABLE: SMALL PIECES OF SAMPLES FREE OF CHARGE; FULL LENGTH SAMPLES SHOULD BE PAID BEFORE EXPRESSING.
QUALITY CONTROLLING
PROTECTING PRODUCTS-RANDOMLY SELECTS CARTONS TO BE INSPECTED PLANK STABILITY-VERIFY MOISTURE CONTENT SCRATH RESISTANT-TEST VARNISH HARDNESS RESISTANCE AGAINST FLAKING-TEST VARNISH ADHERENCE FITTEST SPECIFICATION-VERIFY VARNISH BRIGHTNESS AND PRECISION MEASURES TO EACH PLANK AND ITS COMPONENT PARTS.